Tuesday, March 12, 2019

Air conditioner

Tout Air-condition and spreading Based on the peeled facilities of meeting room and exhibition hall, we would need to design distribute-condition and ventilation system too. Firstly, great melodic phrase quality and circulation is the most important dissipate of the venue ventilation system. In contrast, poor air quality and circulation will easily let people sleepy. Also, indoor temperature should be maintained between 24-ICC according the g everyplacenment standard. So, should have independent, adjustable temperature system to controllers for the ambient temperature of the rate of people.For meeting rooms, an optimum condition of 50+5% is generally use for design purpose. And the exhibition hall should need strict control of copulation humidity is critical because it will be locks of art and feisty objects. In view of this, we would choice unitary equipment of meeting room. The system is a central air teach system in the form of air conditioning load. It is lower cost pac kaged, simplicity of installation and individual control unitary equipment.Because it uses a concentrated form of air conditioning dad, so relative to the air conditioning load distributed processing distributed air-conditioning system, which has heftiness-efficient, comfortable, convenient alteration capacity, low noise, vibration and other prominent advantages. Suitable for meeting rooms or so room temperature ICC and 60% to 80% humidity standard of requires fresh air. Also, if the inner noise, much(prenominal) as noise of the air conditioner is too large, it will greatly affect the performance of the audio system, difficult to hear speech of chairman.As the identical condemnation, we would choice central station systems of exhibition hall. The system is host by the microcomputer to control central air conditioner each interval, its can mechanisation to load operation according to the actual and to simplify air conditioning facilities management. Also without taking the dev ice layer, can reducing utilities and construction enthronization to easily with the house renovation. And, it is running by water source catch fire pump, no combustion process to avoid the sewage, effectively saving energy and operating costs and it general service life more than over system, about of 15-25 years.Acoustic and upright control In addition to, design the air condition and ventilation also need to design acoustic and well-grounded control equipment too. When designing this equipment, will need considerations influence various aspects of the venues such as the layout, volume, ceiling construction and other equipment requirements. According to the technical requirements of acoustics of meeting rooms have some recoil time requirements. In general, the reverberation time is too short will let the sound dumb mixing time is too long will let sounds confusing.Therefore, diametric meeting rooms has its best reverberation mime, right reverberation time can beautify spoke smans voice and to cover the noise, increase the effectiveness of the session. Also, to take c are sound insulation and sound absorption, the room should with carpeted floors, ceilings and insulation blankets are equipped within four walls, double glazed windows should be utilise and set the double door for sound system. These sound control system also suitable of exhibition hall. But exhibition halls area lager than meeting room and often held different event, so it will be need installed control rooms of the hall to control sound.In control room, the temperature must(prenominal) be maintained at around 1 8-ICC and keep settle down and dry environment to protect the equipment would not be affect by humidity. Because of this, it also need sufficient quadruplet to separate ventilation and for maintenance. And the rooms space should be usually mm wide x 2. Mm oceanic abyss (10 x 8 Ft) suitable to accommodate a sound-mixer console with VA equipment. In concussion, the room shou ld locate at the rear of the venue to provide sound control. So need adequate space to operate the master control, equipment and work table also.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.