Safety, Health and Environmental Risk

For al close to people, the dustup safety, salutaryness and environment risk would automatic whollyy be synonymous with occupations touch in industrial and mechanical factories, chemical labs, or construction sites. Although these factors whitethorn be more(prenominal) common in a good deal(prenominal) ready settings, the integrity is safety risks and hazards to a fault exist in a regular authorization or work place. The risks however, manifests in the form of biomechanical-related try on and injuries. This includes lower tooshie injury, carpal tunnel syndrome, and crying strain injury among many others.such(prenominal) figures of physical straining can reply to fatigue and pain which may then motive the worker to perform poorly and sluice be unproductive. This paper will discuss heterogeneous types of biomechanical and ergonomics-related injuries in the employment. It will also tackle the causes as well as their negative effects on the workers. Consequently, thi s paper also aims to give recommendations on how to in effect and efficiently breed this problem. A regular work desk at a typical home may seem like a hazard-free and safe work environment.However, several(prenominal) studies sharpened that prolonged and sustained work posture may result to various musculoskeletal roughnesss. Injuries include repetitive strain injury, carpal tunnel syndrome, and cumulative trauma dis decree among many others. In fact, agency of Labor Statistics musical com correct that cases of ergonomic disorders are now rapidly growing in figures. match to researches, occupational illnesses as well as musculoskeletal disorders enlarge from 18 share in 1985 to a staggering 56 percent in 1991 (University of Maryland 2008).Today, these numbers continue to rise as more and more workers experience physical strain in the workplace. According to the Occupational wellness and Safety Administration there are over 647,000 cases of work-related injuries to date. A part from this, occupational injuries account for more than $20 billion of the workers compensation costs (USA Bureau of Labor Statistics, 1996). There are several types of biomechanical or ergonomic disorders. one and only(a) of which is the carpal tunnel syndrome. The carpal tunnel syndrome or median neuropathy is a type of physical strain generally associated with information processing system workers.It is one of the most common types of work related injuries primarily because of the wide spreading use of calculating machines. Reports show that about 50 percent of computer workers experience this disorders symptoms buy atly. This ensure roots from the overuse and repetitive manual activities such as typing which causes the median nerves to be compressed in the wrists. Indivuals with this particularise would usually feel numbness, heft flunk, and sometimes even pain in the hands, blazonry, and fingers. Some patients even feel a pronounced pain or sensations at night.As t his injury progresses, the person may feel cramping and weakness in the hand. It can also lead to a mitigate in grip strength. Sharp pains will also be frequent as it will cause the patient to suffer (Medicine. net, 2009). Lower keystonebone injury is a nonher common type of musculoskeletal disorder in the work place. According to the Bureau of Labor Statistics, about 20 percent of occupational injuries are back injuries. Further, about a quarter of the drill compensation claims are back injury (USA Bureau of Labor Statistics, 1996). This condition is often attributed to incorrect sitting postures.Office workers are especially defenceless to this injury primarily because they retain their sitting posture for hours. Apart from the posture, position equipments also contribute to this condition. Poorly designed passs or computer turn off can highly affect the posture of the substance abuser. Sitting in such chair for long hours can easily result to lower back pains. Cumulative trauma disorder of the hurrying extremity is another type of ergonomics- related disorder. Similar to carpal tunnel syndrome, this condition is a result of repetitive manual work. This causes the body, such as the fingers, shoulders, and neck to feel pain. late researches show that cases of cumulative trauma disorder of the stop number extremities create plusd over the years. The National Institute for Occupational Safety and Health even categorizes this condition asone of most meaning(a) occupational health problems today. This is due to the fact that cumulative trauma disorder of the upper extremities account for about 56 percent of work-related injuries (Melhorn 1996, p. 1264). Cumulative trauma disorder of the upper extremities, carpal tunnel syndrome, and lower back injuries are all caused by excessive physical freight rate.In the research work authorise Biomechanical Aspects of Work Related Musculoskeletal Disorder, Robert Radwin et al. (2002) explained that the ground physical encumbrance or cut would refer to the physical stress acting on an individuals body (Radwin et. al. , 2002, p. 153). Similarly, physical stress is the physical persona that makes up both the immanent and external factors. This includes kinetic personnel department, kinematics, oscillatory, and thermal. Kinetic force would refer to the voluntary motions exerted against an external object such as lbf. or string an object.This type of pressure would then create a strain on the tendons and ligaments in the body. An incr relaxation method pressure or force would result to a greater level of stress (Radwin et. al. , 2002, p. 156). Kinematics refers to the motions or movements that position the body. An uneven or unbalanced motion could cause angular displacement. This in turn, could create stress and load on the nerves as well as in the blood vessels. Consequently, oscillatory force creates pressure and load to the body. Oscillatory or external vibrations affects the not only the musculoskeletal placement but also the bodys vascular and nervous system.Temperature of thermal measurement also plays an essential role to the achievement and dexterity of an individual. longsighted exposure to cold environment for instance, can decr relievo the strength as well as the sensibility of the muscle. Most of these loads are affect by external factors such as the work place, location furniture, and vigor sources among many others. Biomechanical factors like motions, exertions, body position, and forces also contribute to the physical load endured by the body. (Radwin et. al. , 2002, p. 154). Musculoskeletal disorders also come from various activities, repeated and put in over time.Thus, individuals such as employees or workers who are exposed to as much as eight hours daily, experience work related disorders such as carpal tunnel syndrome and back injuries. This is largely because of the long and repetitive activities that are transferred by dint of the different parts of the body which then creates an intimate load ands stress on the tissues, nerves and ligaments. The combination of external and internal stress can add much stress on the ligaments and alignment tissues of the body. Studies reveal that constant exposure to loads and stress can cause damage to the muscles and nerves.One way of reducing this external stress is through ergonomics. Ergonomics is the science that deals with engineering machines and equipments in order to decrease stress on the human body. At the same time, it is also intended to increase human productivity by eliminating discomfort and fatigue (Answers. com, 2009). Ergonomically designed way and workplace furniture such as work desks, tables, chairs, and computers can effectively reduce the load on the human body. According to studies, ergonomic furnishings in the workplace do not only reduce the level of stress among workers, but it also optimizes and increases productivity.Studies also reveal th at there is a significant increase in efficiency levels as well as the attribute of service in ergonomic-friendly companies. Employees also feel more motivated as they experience less stress and suffer fewer pains. A new-fashioned study conducted by Michael Smith and Antoinette Bayehi (2003) showed that an ergonomic controlled office increased the performance of call center workers by 50 percent. Over all, a heart and soul of 4. 87 percent of output increase was recorded among the control collection (Smith and Bayehi, 2003, p. 16).Similar increase in productivity was also recorded in a research conducted in a silicon chip position showed a 400 percent growth in productivity. This increase involves an increase in man hours as well as a decrease in work errors (Relating Productivity to Ergonomics, 2009, p. 3). Apart from productivity, studies and researches also reveal that companies who have decided to switch to ergonomically designed furnishings saved thousand of dollars in ter ms of compensation and insurance cost. A recent study showed that a nerve company who redesigned their observation pit was able to save as much as $150,000 (Ergoweb, 2009).With such benefits, it is only fitting that companies should address their work-related problems through ergonomics. This intend considering essential office equipments such as tables, chairs, and computers. An office chair for instance, plays an most-valuable part in any office environment. This is because almost all employees expire their working hours sitting in their work desks. As such, a chairs height, width, depth, and back rest should carefully be considered. The chairs height should be adjustable or it should measure from 16 to 20 inches. This will countenance the user to comfortable place his feet flatly on the ground.When it comes to dirty dog width, it is essential that the chair provides enough quadrangle so that the user will be able to seat comfortably. The standard width for most office chai r is 17 to 20 inches. This leaves the user with enough space or agency so that he or she can seat in ease (Ergonomics Safety Program, 2009). The back rest is also an grand part of an ergonomic chair. Thus, the back rest should at least be 19 inches wide. Also, the chair should have a lumbar support that adapts to the curve of the users back. An arm arrest should also be drink as this will allow the users shoulder and arm to relax.Other factors such as the swivel function and the seat poppycock must also be considered. The swivel function will allow the user to move around in his or her work desk with ease and comfort. Likewise, the chairs material should be soft enough so that the worker will be able to seat and work comfortably. The office desk or table is an office furniture that requires to be ergonomically designed. Along with the chair, the work desk is used by most office employees for long number of hours. Therefore, it is weighty that the work desk allows the users to often stretch in order to prevent muscle cramps and pain.The tables height should be at least 23 to 33 inches. An adjustable table is also recommended so that the users forearms are parallel to the floor. Similarly, the work space should provide enough subdivision space in order for the user to come close to the desk as possible (Ergonomics Safety Program, 2009). The work desk should also have enough room for the user to work befittingly. A writing surface of about 16 to 20 inches should be provided. Document holders and drawers are also necessary. Material-wise, it is grievous for the work desk to have a matte finish. This will eliminate the scintillation from the computer.Desks with rounded corners are also recommended in order to prevent the arms or wrist from coming in contact with square or sharp edges. The positioning of the computer in the work desk is equally significant. The computer monitor should be placed directly in front of the user. This kernel that the top of t he screen must be parallel to the users eyes. Apart from this, the monitor should be positioned in such a way that there is very minimal reflection and glare (Ergonomics Safety Program, 2009). The computer keyboard on the other hand, should be placed in such a way that the user will be able to reach it without extending his upper arm.The forearms of should also be aligned floor so that the wrists will not bend while typing. This can be addressed by selecting a keyboard that can be adjusted and tilted. When typing, the arms should hang loose or it should rest comfortably in the desk to prevent the muscles in the shoulders from cramping (Daniels, 1996). Likewise, the computer walk must be placed at the same area as the keyboard. This means that the click button of the mouse is aligned properly with the keyboards. Utilizing a mouse tray with trackballs can permit the user to use the mouse with ease and comfort.This will also allow the wrist to relax while staying in a neutral position (Daniel, 1996). Although ergonomically designed work equipments can reduce the risks of occupational injuries and disorders, it is still important to remember that this alone, cannot make up for unsound practice. Employees and workers must also be conscious(predicate) of the proper measures in order to reduce stress and injury. One way of doing this is to educate the employees about the distressfulness and risks of office-related injuries. This can be done through seminars and workshops about office and workplace safety.Memos and reminders about work place safety should also be frequently posted in the workplace. Distributing fliers and brochures about ergonomics-related injuries can also help spread awareness. At the same time, the management should also set an example to the employees by following all the safety measures. Informing the employees about the different consequences as well as the benefits of this issue will allow them to be aware about this looming workplace probl em. More importantly, this will encourage the employees to take the proper measures to prevent work-related injuries from happening.